How to Hard Reset LENOVO Vibe A Plus and Remove Password Locked Screen?

Last Updated on 27th August 2020 by Harvey Bernard

How to Hard Reset LENOVO Vibe A Plus?Queston: How to Hard Reset LENOVO Vibe A Plus?

Now here is the complete tutorial to reset Vibe A Plus A1010a20 (Android 6.0. to factory settings). In any case your phone is running slower and you’re having Freezing/Hanging issues or you wanted to remove a file or Viruses from your Lenovo Vibe phone.

You can also use this guide to remove Security Codes, Pin Codes, Password or Pattern Locked screen. If you’ve lost or forget your Password or Pin Code. Then this tutorial will help you to solve all of these problems.


Make sure your phone battery is fully charged. Before performing this Hard Reset Method. It is good to remove the SIM card and Micro-SD card from the device.

5 Easy Steps to Hard Reset your Lenovo Vibe A Plus Phone:

Step 1: Powered Off your phone

Step 2: Now “Hold Power Button and Volume Up Button” together for about 6 Seconds.

How to Hard Reset LENOVO Vibe A Plus?

Step 3: After that the “Recovery” menu will appear on your Vibe A Plus Phone screen with the message:

Select Boot Mode:
[Volume_UP to select. Volume_Down is OK.]

[Recovery Mode]
[Fastboot Mode] <<==
[Normal Boot]

Step 4: Here you need to Press Volume UP button to select “Recovery MODE” and Press Volume DOWN button to confirm the selection.

Step 5: After few seconds you’ll be having Android Logo on your Lenovo Phone screen. Press Power Button + Volume UP Button at the same time to enter in “Recovery”.

Last 4 STEPS to Completely Hard Reset Lenovo Vibe A Plus Phone

Step 1: Once you done that, “Android Recovery Menu” will appear on your “Lenovo Vibe A Plus” screen and you’ll be having different options.

Step 2: On this screen you need to select “Wipe data/factory reset”. So to do that press Volume Down button to navigate the option and press Power Button to confirm.

Step 3: After that again Press Volume Down button to Select “Yes — delete all user data” and Press Power button to confirm the process.

Step 4: Finally, in the next step just press Power Button to “Reboot system now” and wait untill your phone restarts.

Now just do the Initial Setup for your phone and all the issues about Hardware or Software will be removed completely.

This method works for Lenovo Vibe B and Lenovo Vibe A Plus phones. If you want to Hard Reset Vibe B phone then you can also apply this instructions to that phone too.

Last Words:

So, it was the complete guide to Hard Reset your “Vibe A Plus A1010a20” device. If you are still having some issues about your Lenovo Vibe phone then feel free to ask me in the comment below.


LENOVO Vibe A PLUS: Hard Reset A1010a20 Android 6.0 Factory Settings
Article Name
LENOVO Vibe A PLUS: Hard Reset A1010a20 Android 6.0 Factory Settings
How to Hard Reset Lenovo Vibe A Plus A1010a20 to Factory Settings. Android 6.0, Remove Password, Pin Codes, Locked Screen. Easy Steps Hard Reset Method 2016

One comment

Leave a Reply

Your email address will not be published. Required fields are marked *